Product Specifications

Ultra-Thin LED Grille Light Kit for Toyota Land Cruiser LC300

The Ultra-Thin LED Grille Light Kit for Toyota Land Cruiser LC300 creates a focused auxiliary-lighting layout that follows the front-end character of the LC300. Compact single-row light modules sit within the grille area to add a white main light and a warm amber backlight without overwhelming the original vehicle design. The system is offered in 4-light and 6-light configurations, so the grille layout can be selected to suit the intended appearance and illumination arrangement. Each configuration uses the same per-light electrical and optical specifications, with the quantity of light modules and mounting-bracket sets adjusted for the selected layout.

Dedicated LC300 Grille Integration

This kit is designed around the Toyota Land Cruiser LC300 grille application rather than as a general-purpose lighting product. The installation concept shown for the system places the modules within the factory grille structure using dedicated side mounting brackets. This vehicle-specific approach keeps the light modules compact and visually integrated across the front end. It also helps retain a clean, intentional appearance when the lights are off. Confirm the vehicle's exact grille configuration, accessory clearance, and local auxiliary-lighting requirements before installation.

Bolt-On Mounting Concept

The mounting arrangement uses purpose-designed brackets together with a matching wiring harness. The installation presentation is based on a bolt-on route intended to avoid cutting into the LC300 grille structure. The modules are positioned individually so the spacing can follow the selected 4-light or 6-light configuration, while the dedicated brackets provide an orderly mounting location behind the grille. Electrical work and final aiming should be completed carefully for the specific vehicle installation.

White Spot Beam and Amber Backlight

Each light module combines a white main light with an amber backlight. The white main light is specified with a spot beam for concentrated forward illumination, while the amber backlight adds a distinct warm visual signature to the grille. Per light module, the white color temperature is 5,500 ± 500K and the amber color temperature is 2,300 ± 500K. Source-stated optical data lists 1 lux at 160 m for white and 1 lux at 147 m for amber. The white actual-output figure is 1,767 lm ± 10% per light, while the amber actual-output figure is 1,034 lm ± 10% per light.

Built for Real Roads

The ultra-thin single-row light module measures 4.37 × 2.13 × 0.98 in, helping it fit naturally within the grille area while keeping the lighting arrangement compact. Each module uses four 9W LEDs for the main light and three 1.5W LEDs for the backlight. Its stated power output is 36W ± 10% per light module, with a theoretical output of 2,800 lm ± 10% per light module. These figures are stated individually for each light, maintaining the same technical basis across both available configurations.

The product imagery highlights a sealed groove with a one-piece die-cast aluminum-alloy housing, scratch-resistant hardened projector optics, and a built-in smart temperature-controlled LED driver control board. Together, these construction details support a compact grille-light module designed for regular road use. The hardened optics protect the light-facing surface, while the integrated thermal-control approach is intended to support stable operation during extended use.

All-Weather Protection

Each light module is rated IP67 for ingress protection and is specified for a DC 9–48V electrical system. The stated input current is 1.53A at 13.5V per light module. This combination supports the dedicated LC300 grille-light application in demanding outdoor conditions. The two-year warranty provides added product support for the completed lighting system. For best long-term results, keep connectors properly seated, follow the vehicle-specific wiring route, and inspect the installation after exposure to harsh weather.

Choose the Right Grille Layout

The 4-Light Kit includes four light modules, one matching wiring harness, and four vehicle-specific mounting-bracket sets. The 6-Light Kit includes six light modules, one matching wiring harness, and six vehicle-specific mounting-bracket sets. Both options retain the same per-light spot-beam, white-and-amber, voltage, current, and IP67 specifications. Choose the configuration according to the preferred LC300 grille layout, then confirm the vehicle details before installation. The result is a dedicated lighting upgrade with compact module dimensions, controlled white forward illumination, and a distinctive amber backlight.