Features
• Prevents fast flash and hyper flash after install LED headlight bulb
• Plug and play installation, no modification needed.
• Fully waterproof and shockproof

Overview
No more errors or flickering. CN360 latest R1 anti-flicker modules are designed to condition factory power signals, both by smoothing out flickering signals to the output, and by replicating the power consumption of a halogen bulb, to avoid vehicle “bulb out” warnings that usually come with LED power draws.

Plug and play installation.
CN360 R1 LED Resistor creates the double plug combines together design to improve the installation experience. Sided plug design aims to access the bulb, usually the car assembly has two identify installation types, externally wired and internally wired.

A. Externally wired. We just need to wire the bulb with the R1 anti flicker together and put it in the back of the housing.

B.Internally wired inside cover. We just need to access the bulb and the R1 LED decoder together and put them inside of the headlight housing, then cover the dust cap.Watch the Step 1.

C.Internally wired outside cover. We need to drill a hole in the center of the dust cover then wire the bulb with the R1 LED resistor together, finally reinstall the dust cover. Watch the Step 2.

It is the polarity design. So we need to match the replaced LED headlight with correct positive and negative. These module is simply plug design, just need to connect with the LED headlight bulb and the factory car plug together.

Fitment.
R1 anti flicker can work with any LED bulb. It will prevent flickering or bulb out errors in low beams, high beams, fog lamps, or daytime running lights. These led resistor is not recommended to use with the HID bulb together in case of the unstable or excessive current to damage product.

This product main to solve the current issue which caused the bulb flickering or “bulb out” warnings. These module can work well in Ram, Dodge, Ford, Jeep, Toyota, Honda and etc.

• 9005 R1 LED Resistor is compatible with 9006, 9012, H10 and 9145 size plugs.
• H11 R1 LED Resistor is compatible with H8, H9, H16(JP), 880 and 881 size plugs.
• 5202 R1 LED Resistor is compatible with P13, PSX24 and PSX26 size plugs.

WARNING! The resistors get hot! It is very important to mount them to something metal behind the headlights with screws, not zip ties. The resistors get so hot they can melt some light plastic and short wires. Keep them away from all wiring and heat sensitive materials!

What’s included
2 X CN360 R1 LED Resistor
1 X Color Gift Box

We CN360 never ever stop development!