Product Specifications

Gen 1 LED Grille Lights Ultra Thin 25mm IP67 25W Modules White Yellow Tri Color

The 25 mm series is the most luminous set in this lineup while still fitting a hidden-install profile. Each module runs GC-7035 LEDs on a 10–30 V DC platform with a stable 25 W class drive. Model options are LG2501-WHITE at 6500 K, LG2502-YELLOW at 3000 K, and LG2502-W+Y with selectable white, yellow, or a 4000 K mix. Measured output leads the range: 1103.00 lm (LG2501), 1183.00 lm (LG2502), and 1036.00/1049.00/1260.00 lm for LG2502-W+Y in W/Y/W+Y. Actual power is 22.48 W, 21.84 W, and 22.46/22.18/21.10 W respectively.

Ultra-Thin Housing with Maximum Thermal Headroom

The 67.6 × 37 × 25 mm housing increases fin depth and mass for sustained brightness during long runs. Despite the added depth, the unit still tucks behind grilles and into bumper recesses for a clean, concealed look.

Stable 25 W Drive and Class-Leading Lumen Output

Measured brightness defines this tier. White delivers 1103.00 lm for crisp definition; yellow reaches 1183.00 lm for strong performance in rain, fog, and dust; the mixed 4000 K mode on the tri-color unit hits 1260.00 lm, offering balanced contrast when conditions vary.

Multiple Mounting Options for Professional Results

Layouts shown include behind-grille, bumper, and side placements. The bracket angle is easy to repeat across modules, letting installers build long, even rows with matched aim so the front signature appears continuous.

IP67 Waterproof with High-Efficiency Aluminum Heat Sink

The thermal design relies on a precision-machined 6061-T6 aluminum heat sink that conducts and disperses heat away from the GC-7035 LEDs to keep brightness stable during extended use—no moving parts required. The housing is sealed to IP67, blocking dust and withstanding rain, slush, and car-wash spray for dependable road performance. The working temperature range from −40 °C to +80 °C further reflects durability in real driving conditions, from winter starts to heat-soaked engine bays.

10–30 V Wide-Voltage Platform and Simple Wiring

The 25 mm series shares the family’s 10–30 V DC architecture with a typical 2.0 ± 0.6 A @ 9 V draw. Multiple connector options are indicated in the wiring graphic to match different harness plans. The two-wire hookup helps reduce install time across passenger and commercial vehicles.

Diverse Combinations and Varied Lighting Effects

Uniform white rows create a modern DRL-style band, all-yellow arrays emphasize poor-weather utility, and alternating color layouts deliver a distinctive grille glow. Tri-color modules allow one hardware set to cover day-to-day driving and special-use requirements.

Seven Lighting Modes with Optional Controller

The optional control box unlocks seven selectable behaviors. Because the modes reside in the controller, behavior can be changed later without changing the lamp hardware or wiring strategy, useful for fleets and dealers.

Tri-Color Precision for an Even Grille Glow

LG2502-W+Y offers accurate 6500 K and 3000 K plus a balanced 4000 K mix. The optic and LED layout maintain uniform illumination so long multi-module rows look premium rather than patchy.

Concealed Installation Scenarios

Imagery highlights use on cars, motorcycles, off-road vehicles, and trucks. The 25 mm series is ideal when the project demands the highest measured brightness in a footprint that still hides behind the grille.

Dimensions and Model Options

All 25 mm modules share a 67.6 × 37 × 25 mm housing with GC-7035 LEDs and 10–30 V DC input. Representative measurements: LG2501-WHITE 22.48 W and 1103.00 lm; LG2502-YELLOW 21.84 W and 1183.00 lm; LG2502-W+Y 22.46/22.18/21.10 W and 1036.00/1049.00/1260.00 lm in W/Y/W+Y. All models are covered by our 18-month warranty.