Product Specifications

80W Round LED Auxiliary Light with White & Amber DRL

This 80W Round LED auxiliary Light combines a compact round lighting format with a specified combo beam, a 6000K ± 500K white main beam, and integrated white and amber DRL accents. It is designed for auxiliary driving and work-light installations where a durable round lamp, defined forward illumination, and a clean integrated appearance are required. The light operates on DC 10-30V systems and includes two 3 m cable leads with bullet connectors for practical wiring layout.

The lamp uses 20 × 4W HF LEDs together with 48 × 0.5W 3030 LEDs. Its stated technical data, including 80W ± 10% power output, 5.3A input current at 12V, lumen figures, and 1 Lux measurement, are presented in the specification table for straightforward comparison. The round front lighting layout, die-cast aluminum rear section, screw-less frame, and adjustable bracket form one integrated auxiliary-light construction.

80W LED Lighting Configuration

The specified LED arrangement combines HF LEDs with 3030 LEDs in a round front-face design. This configuration supports the stated 80W ± 10% output while maintaining the distinct round profile of the light. The technical table records 9,000 lm ± 10% theoretical lumens and 7,583 lm ± 10% actual lumens exactly as supplied. These values are shown as labeled specification fields and are not used as a substitute for installation-specific lighting evaluation.

Long-Range Combo Beam

The specified combo beam is designed to balance forward reach with useful surrounding illumination. This version lists 1 Lux at 407 m, giving a defined reference point for its supplied illuminance data. Final beam performance depends on aiming angle, mounting position, vehicle structure, surrounding surfaces, wiring condition, and the intended application. The lamp should therefore be mounted and aimed according to the actual working environment rather than treated as a universal replacement solution.

White and Amber DRL

White and amber DRL elements create a defined perimeter appearance around the main lighting area. The DRL design gives the lamp a modern visual signature when the DRL circuit is used, while the main white beam remains the primary forward-lighting function. This 80W version does not include a dynamic start-up sequence. Its DRL should be represented as White & Amber DRL only, without dynamic, chasing, sequential, switchback, or strobe claims.

High-Performance Cooling System

The rear housing is constructed from die-cast aluminum and uses a multi-fin heat-sink structure. The fins add external surface area around the rear of the lamp to support heat release away from the LED assembly during operation. This cooling construction is integrated into the product body rather than relying on a separate external component, helping the lamp retain a clean round front presentation and a purposeful rear thermal structure.

Screw-Less Front Frame Design

A screw-less front frame gives the lamp a seamless integrated appearance around the lighting surface. The front construction is presented with high light transmission, weather-resistant performance, and stone-chip exposure in mind. Together with the confirmed IP67 ingress-protection rating, this design supports installations exposed to dust, rain, road spray, and changing outdoor conditions. The IP67 rating is an ingress-protection specification only and does not establish road legality or unrestricted use in every environment.

Adjustable Bracket and Included Cable Leads

An adjustable bracket allows the installer to set the lamp orientation before fully tightening the mounting hardware. This makes it easier to direct the combo beam toward the intended area after considering mounting height and installation angle. The supplied pair of 3 m cable leads with bullet connectors supports an organized wiring layout. Confirm mounting strength, voltage compatibility, fuse protection, cable routing, available installation space, and applicable local requirements before use. The product is supplied with a two-year warranty.

Application Flexibility

The round auxiliary-light format can be considered for compatible A-pillar, front-bumper, and roof-mount positions where the vehicle structure and local requirements permit. These are example mounting positions shown for the product family, not universal fitment claims. Proper bracket installation, wiring protection, beam aiming, and vehicle-specific clearance checks remain essential for every application.