Product Specifications
|
PRODUCT TYPE LED Back-Up Bulbs |
SOCKET TYPE T15 |
|
MODEL NO. P-S09-T15-W-NP-U P-S09-T15-Y-NP-U P-S09-T15-R-NP-U |
LIGHT COLOR White / Yellow / Red |
|
LED TYPE 7035 LEDs |
LED QUANTITY 2 LEDs |
|
OPERATING VOLTAGE DC 11–18V |
CURRENT TEST VOLTAGE 13.5V |
|
APPLICATIONS Back-Up Light, Subject to Appropriate Color and Vehicle Fitment |
INITIAL INPUT CURRENT 1.48 ± 0.30 A |
|
STABLE INPUT CURRENT 0.96 ± 0.30 A |
WHITE INITIAL LUMINOUS FLUX 1,900 lm ± 10% |
|
WHITE STABLE LUMINOUS FLUX 1,100 lm ± 10% |
YELLOW INITIAL LUMINOUS FLUX 1,900 lm ± 10% |
|
YELLOW STABLE LUMINOUS FLUX 1,100 lm ± 10% |
RED INITIAL LUMINOUS FLUX 1,900 lm ± 10% |
|
RED STABLE LUMINOUS FLUX 1,100 lm ± 10% |
SERIES S09 |
S09 Series T15 LED Back-Up Bulbs
The CN360 S09 Series T15 uses two 7035 LEDs in a compact automotive bulb. The range lists back-up lighting as its application and offers white, yellow, and red versions, with color selection subject to the intended lamp requirements. The specified operating range is DC 11–18V.
T15 Fitment for Back-Up Lighting
The T15 connection identifies the bulb format, while the lamp's function determines the required light color and electrical operation. Back-up lighting is the listed application for this range. Select the appropriate color for the original lamp requirements; the presence of a color option does not make it suitable for every lamp position.
Consider the reflector, lens, and available space together when selecting the bulb. These parts influence the distribution and appearance of the light after installation. The specified lumen value describes bulb output, while the finished lamp pattern depends on the complete assembly.
White, Yellow, and Red Light Options
White, yellow, and red versions are available. Each bulb is selected for its required color; these options do not indicate automatic color switching. The choice should follow the original lamp function, lens color, and the lighting requirements of the intended vehicle position.
Use the output figures for the selected color when evaluating the bulb. The appearance of white, yellow, and red light through a vehicle lens differs, so the color choice and the light-output rating should be considered together. Confirm the installed result within the intended housing.
2 LED Lighting Configuration
The T15 configuration uses 2 leds with 7035 LEDs light sources. This arrangement forms the lighting section of the bulb and should be matched to the corresponding socket version. The LED specification identifies the light-source configuration without assigning an unsupported chip brand.
The LED assembly works with the lamp's existing optical surfaces to deliver light through the lens. Correct bulb seating maintains the intended position inside the housing. Check the space around the complete lighting head and ensure that the lens or rear cover can be fitted normally after replacement.
Initial and Stable Light Output
Each of the three colors has a listed initial output of 1,900 lm ± 10% and a stable output of 1,100 lm ± 10%. The initial and stable values are shown separately so the operating states remain clear when comparing the bulb with the requirements of the intended lamp.
Initial and stable output describe different operating states of the selected bulb. They are not two selectable brightness settings. Use the corresponding current and light-output values together when assessing this version, and keep the color-specific specification associated with the correct bulb.
Electrical Specifications at 13.5V
Input current is specified at 1.48 ± 0.30 A initially and 0.96 ± 0.30 A when stable, measured at 13.5V. These electrical values apply to the listed color options. Match the bulb to a compatible lamp circuit within its DC 11–18V operating range.
The specified test voltage identifies the condition used for the current values. The operating range describes the supply range for this version. Matching both the socket and electrical requirements helps establish suitability for the intended installation.
T15 Socket and Application Matching
Select the T15 connection required by the original lamp. Socket compatibility, circuit requirements, and space around the bulb should all be checked together. Secure seating provides the mechanical connection and establishes the position of the lighting head.
After fitting, confirm normal illumination through the vehicle's controls and check that the original cover closes correctly. For circuits with lamp monitoring or additional control functions, assess operation in the actual vehicle. A socket match alone does not establish compatibility with every electrical control system.
